Vintage Star Cabochon Setting - 20mm Setting

Beautiful Vintage Star Settings

You can use these just as you would a pendant tray.

Available in 3 Finishes:

:: Shiny Silver
:: Vintage Copper
:: Vintage Bronze

The setting inset fits our 20mm glass domes.

You can purchase these with or without glass domes for your convenience.

Setting: 20mm
Overall Dimensions: 50mm Tall x 50mm Wide

Here's how I make my pendants using settings and pendant trays:

1. I print my image on 90lb card stock using a color laser printer,
2. I then put a generous amount of our Sun And Moon Glaze on the back of the glass insert,
3. Then I pick up the glass, turn it over, and place it directly onto my image,
4. Then I let it sit and dry for a couple of hours and then trim off the excess paper,
5. I then apply a "thin" layer of glaze over the back of the paper and let that dry for a couple of hours,
6. After that, put a tiny bit of Sun And Moon Glaze inside the bezel cup and then I place my glass piece that I made inside the bezel cup and center it.

This is a very easy project and the results are simply beautiful!